link href="https://fonts.googleapis.com/css?family=Open+Sans:400,600,700" rel="stylesheet">

ECHO1 M4 Genesis
#1
Used a V2B sensor cuz the gearbox and selector plate is nonstandard. Otherwise sensor fit fine. Sensor wired along the side of gearbox to stock butt end.
#2
Didn't like this setup so changed it. To remedy the nonstandard selector plate, removed the contact plate and filed away about 0.5mm of material, placing the selector threshold half way.
   


 Also used Silicon16 with deans on motor side. Makes for smoother operation of the stock.
   
  


Forum Jump:


Users browsing this thread:
1 Guest(s)