WASP FCS
AUG erratic behavior - triggering issues caused by loose BBs flying around inside - Printable Version

+- WASP FCS (https://waspfcs.com/support)
+-- Forum: WASP Support (https://waspfcs.com/support/forumdisplay.php?fid=3)
+--- Forum: Issues / Help / WASP Videos (https://waspfcs.com/support/forumdisplay.php?fid=6)
+--- Thread: AUG erratic behavior - triggering issues caused by loose BBs flying around inside (/showthread.php?tid=105)



AUG erratic behavior - triggering issues caused by loose BBs flying around inside - admin - 06-11-2018

AUG erratic behavior - triggering issues caused by loose BBs flying around inside - fix ....


AUG has a hollow body and stray bbs tend to get caught up inside during mag swaps. Sometimes a stray bb will migrate up and lodge itself onto the trigger plate causing triggering issues. 
Recommend putting a barrier inside the body to block strays from entering this section. Wadded paper, insulation, etc. somewhere between the magwell and sensor pwb should be sufficient.